JK-1010

Mini Speed Dome Camera
---------------------------------------------------------------------
CCDSensor:1/4"Interline TransferCCD
Zoom Magnification:x 10 Optical Zoom, x10digital Zoom(Max x 100Zoom)
Day& Night Function  
Max .360/sec high speed Pan/ Tilt Motion

Features:

Camera Specifications
CCDSensor:1/4"Interline TransferCCD
Zoom Magnification:x 10 Optical Zoom, x10digital Zoom(Max x 100Zoom) 
Day& Night Function 
Various Focus Mode: Auto-Focus/ Mamual Focus/ Semi-Auto Focus.
Independent&Simultaneous Camera Characteristic Setup in Preset operation

Powerful Pan/Tilt Functions
Max .360/sec high speed Pan/ Tilt Motion
Using Vector Drive Technology,Pan/Tilt motions are accomplished in a shorest path. As a result,time to target view is reduced dramatically and the video on the monitor very natural to watch.
For jog operation using a controller,since ultra slow spood 0.05/sec can be reached,it is very easy to loccate to desired view . Additionally it is easy to move camera to a desired position 
with zomm-proprotional pan/tilt movement.

Preset,Pattern, swing, Group, Privacy Mask and More…
MAX. 127Presets are assignable and charateristics lf each preset can be set up independently,such as Wite Balance, Auto Exposure, Label and ao on.
Max .8set of Swing action can be stored. This eables to move camera repetitively between two
preset positions with designated speed.
Max.4 of Patterns can be recorded and played back .This enables to move camera to follow any trajecory operated by joystick as closely as possile.
Max.8 set of Group action can be stored. This enables to move camera repetitively with
combination of Preset or Pattern or Swing. A Group ie composed of max. 20 entities of
Preset/Pattern/Swings.
Pricacy Masks are assignable,not to intrude on other's privacy.(4 privacy Zones)

PTZ(Pan/Tilt/Zoom)Control
With RS-485 conmmuncation,max. 255 of cameras can be controlled at the same time.
Pelco-D or Pelco-P protocol protocol can be seleected as a control protocol in the current version of firmware.

OSD(On Screen Display) Menu
OSD menu is provided to display the statuss of camera and to configure the functions interactively.
The information such as Camera ID,Pan/Tilt Anarm Input and preset can be displayed on screen.

Alarm I/O Functions
4 alarm sensor Inputs are available.
To reject external alectric noise and shock perfectly, alarm sensor Input is decoupled with photo coupler.
The signal renge of sensor input is from DC 5.0 to 12.0 volts to adopt various applications.
If an exeternal sensor is activated, camerated, camera can be set to move to the corresponding Preset position.

Reserved Presets fox Special Purpose
Most camea characterristics can be set up easily and directly with reserved preset,not enterring into OSD menu. For more information, refor to"Reserved Preset" in this manual.