IP-003CDA
-----------------------------------------------------
◎Image Sensor:1/3" Sharp CCD
◎Resolution:640×480，320×240，160×120
◎Performance:25(SIF),12.5(VGA)
◎Image Compression:JPEG, MOTION-JPEG
◎I/O ports:2 I/O in& 2 I/O out
◎Event trigger& Action:I/O Trigger，timer Trigger，motion detection
◎Operation system:Embedded real time operation system
◎RAM:16M
◎FLASH:2MB
◎CPU:32 bits，RISC CPU
◎Network Connection:MODEM、ISDN、XDSL、LAN
◎plane definition:420TV line
◎LUX:0.1Lux(F1.2)
◎Video control:
·AWB: White Balance (ATW/Push/Indoor/Outdoor)
·AGC: Automatic Gain Control (On/Off)
·Manual Electronic Shutter (1/50 or 1/60 when AES off)
·Auto DC IRIS
·Auto Electronic Shutter (AES on/off, BLC on/off)
·Day/Night feature (Color/B.W. auto switch in low illumination)
·BLC: Back light compensationDirect Drive Lens; Build-in VR for DC level adjustment
◎LENS:Auto DC Iris F1.2~64 Lens(According to User's need)
◎Serial port:One RS-232 Serial port
◎P/T/Z:One RS-485 Serial port for PTZ camera control
◎Size:110X102X54mm(expect bracket)
◎Power supply:12DC/4W
◎Operating Temperature:（－20℃）——（＋50℃）
→System Requirements(it just for viewing the IP-003CDA)
-----------------------------------------------------
◎Operating System:Microsoft Windows 98/98SE/ME/2000/XP
◎Network Protocol:TCP/IP network protocol installed.
◎CPU:Pentium® II 300 MHz or greater
◎Interface:10/100 Mbps Ethernet card and category 5 cables
◎Web Browser:Internet Explorer 5.0 or later/Netscape
→Panel Description
-----------------------------------------------------
◎Power Indicator
◎Audio input port
◎RJ45: 100 Base-T：Ethernet Indicator
◎I/O：Including two I/O inputs and two I/O outputs.
◎COM port: including one RS-232 or RS-485and one line out
◎BNC port: video output
◎Reset key
◎DC IN jack: 12v 1A
◎Switch: BLC, IRIS, AGC, AWB
→Installation
-----------------------------------------------------
1.Connection of the Network Camera to the PC or network device is made with category 5 cable.
2.Hub Connection needs category 5 straight cable and PC Connection needs category 5 cross cable.
3.LAN (Intranet)、Internet Connection with Ethernet Switching Hub
Network Camera can be installed on the LAN. Network Camera can be accessed through the Internet.
4.ActiveX Controls:If you are using Internet Explorer the first time the PC connects to the Network Camera, a pop up Security Warning window will appear. The window requests your permission to download ActiveX Controls (OCX file) used to display motion video. Please allow the file to be installed. It is required and will not cause any problems with other applications on the PC.
→Product Content
-----------------------------------------------------
◎AC adaptor:1 pc.
◎I/O port link line:1 pc.
◎Category 5 cross cable:1 pc.
◎Setup CD-ROM:1 pc.
◎Operating Instructions:(in CD)