UP-010P

·Support POE (Power Over Ethernet)
·Single CMOS sensor(300,000 pixels)
·Compression:Motion-JPEG
·Resolution:VGA (640x480) SIF (320x240) QSIF (160x120) Optional
·LCD loop-displays IP address/network mask/gateway
·IR Distance:8-10M
·Built-in pan and tilt
·PAN:180°TILT:120°
·DDNS support
·View up to 16 cameras one screen

※Specification:
·IP Camera(UP-010P)
·Video Input:Single high quality CMOS Sensor (30,0000 pixels)
·Compression:Motion-JPEG
·FPS:30 frame per second (640x480) maximum
·Resolution:VGA (640x480) SIF (320x240) QSIF (160x120) Optional
·Typical Bandwidth:
  160x120@10fps : 300 kilobits~ 480 kilobits
  320x240@10fps : 640 kilobits~ 960 kilobits
  160x120@30fps : 900 kilobits~ 1.44 Megabits
  320x240@30fps : 1.92 Megabits~ 2.88 Megabits
  640x480@30fps : 9.6 Megabits~ 14.4 Megabits
  640x480@10fps : 3.2 Megabits~ 4.8 Megabits
·Digital Input:2-way Open/Close Input
·Relay Output:1-way Relay Output ( 36V AC/DC, 2A )
·Connection:5Pins
·Interface:Ethernet 10/100Base-T RJ-45
·Protocol:RTP/IP，UDP/IP，TCP/IP，SMTP/HTTP/FTP, DNS and DHCP client，DDNS
·Supply:POE(Power Over Ethernet) or DC5V
·Consumption:5W Maximum
·Cell:ABS plastic
·Size: 
·Temperature:0℃~45℃
·Humidity:50℃ 95％
·System Setup: Web Page
·Upgrade:Firmware upgrade by web
·CUP:32bit ARM@66MHz frequency
·SDRAM:16MByte
·FLASH:4MByte